High cycle fuse machine is mainly aimed at the production and processing of specific product materials that cannot be completed by ordinary high cycle machine. In order to improve the packaging quality of products, high cycle fuse will also be used. What are the structural composition and troubleshooting methods of high cycle fuse?
1、 Structure composition of high cycle fuse
1. There are two slide positions for the high frequency fuse. The operator only needs to put the product in the front and press the button, the machine head will automatically descend, heat and rise, and the slide will exit, completing all simple operation processes. The staff can use the machine without special training.
2. Adjustment of output power: A special coaxial oscillator with low loss is used, which can adjust the strength of the output force according to the size of the mold and the thickness of the rubber material at any time, so that there will be no interference with the telecommunications during operation. When the output is small, the strength of the output force can be adjusted at any time.
3. Protection device and current limiting protection: when the output force is too large, the high cycle output will be cut off, so the electronic tube will not be damaged due to excessive current in the machine.
4. The surge frequency of the high cycle fuse is 27.12MHz and 40.78MHz, both of which conform to the industrial band standard; The self-excited oscillator of the electron tube generates the quotient frequency electromagnetic field at high frequency, which makes the internal molecules of the processed plastic generate the distance force motion friction in the high-frequency electric field between the upper and lower electrodes, and obtain the welding effect in the mold.
2、 Troubleshooting of High Frequency Fuse
1. Check the welding time on the control panel. This is the time to control the product welding. Generally, it is divided into two time systems: 0-10S and 0-30S. If the time is too short, it is easy to cause the product welding to be insecure. The product can be separated once pulled and cannot be welded. Generally, this time is adjusted to 3S-8S. The product is slowly increased from short to long according to the product shape and material thickness.
2. Check whether the pressure can meet the welding effect of the product. If the pressure is too small, the welding strength of the product is likely to be low and the appearance is not beautiful. If the pressure is too small, adjust the pressure regulating valve, pull the regulating switch up and turn it to the right to increase, and turn it to the left to decrease. If the pressure of the equipment is too small, the welding strength of the product is likely to be low and the appearance is not beautiful. If the pressure is too small, adjust the pressure regulating valve, pull the regulating switch up and turn it to the right to increase, The left rotation is decreasing. The service life may also be affected by insufficient air supply and overload of components.
3. Find out whether the electronic tube, the core component of the electronic tube on the high cycle fuse machine, works normally. Before starting, first check whether the electronic tube is on. This is relatively simple. If the light is not on, the electronic tube is not on. This is relatively simple. If the light is not on, the electronic tube is broken. This is a core component of the electronic tube.
4. First check whether the material contains 30% PVC, PET, PETG, TPU, PU and other materials. If the material does not need to be replaced, second check whether there is extreme temperature control heating on the machine. The temperature is mainly used to heat the mold, so that it can conduct heat better and the welding effect is better. Adjust according to the material characteristics.
So that's all for today's explanation. I believe you have a certain understanding of the structure and troubleshooting methods of the high cycle fuse. Thank you very much for your patience. If you want to know more about the high frequency fuse, you can call the service hotline at the top right corner to consult us.
