Parameter function of automatic high cycle wave machine

Date:2022-10-19 Reading:

The automatic high frequency machine operates in the automatic turntable mode. The upper and lower molds are aligned accurately, with high frequency, simple operation and easy understanding. The automatic high frequency machine is equipped with a touch screen to control the operation of the whole machine and a built-in programmable controller industrial control integrated system. It is convenient to change the mechanical control program or expand other mechanical application functions in the future. This system conforms to the application of mechanical operation and is also the development trend of modern machinery.

Parameters and functions of automatic high cycle wave machine:

Automatic high cycle machine can monitor heating temperature curve, current voltage curve, counting, etc. The memory of each workpiece is stored and printed. The automatic high cycle machine can store and set the heating process parameters of multiple workpieces. When changing different workpieces, it can be directly used without debugging. The automatic high cycle wave machine can be equipped with multi cycle power heating, and has five cycle power control function. Analog machines usually have only two time periods and two power potentiometers that can be adjusted.

The switch buttons of the control circuit of the automatic high cycle wave machine are all 24V safe voltage. The imported high-frequency square barrel design is adopted, so the output is stronger and the current output is stable. The automatic high cycle wave machine is equipped with a super sensitive spark proof device, which can prevent sparks and damage to the mold during high cycle welding. The automatic high frequency machine is equipped with an overload automatic trip safety switch to maintain the normal and safe operation of the machine. The oil pressure of the automatic high cycle wave machine is designed compactly and accurately, and can be adjusted separately. The adjustment is accurate and convenient. The automatic high cycle machine is also equipped with an oil pressure limit switch, which can adjust the pressure safety upper limit to protect the safety of the machine and the mold.

20200509_180324.jpg

The advanced spark protection system is adopted for the automatic high frequency machine. The spark protection enters the working state within 0.03 seconds of the time interval when the mold generates sparks, so as to protect the mold from damage. The automatic high cycle machine uses the working principle of gas and oil pressure to obtain 8000 kg cutting pressure instantly, which is suitable for cutting products of different thicknesses. The automatic high cycle wave machine adopts shielded structure, and has many functions such as manual/automatic, mold test, cutting, heating, high cycle, etc. It occupies a small area and is easy to install and maintain.

The automatic high-frequency wave machine is equipped with a high-frequency frequency stabilizer and a high-frequency shielding device. Try to reduce high-frequency interference and avoid radio wave interference. At the same time, the frequency drift caused by improper operation can be avoided, which can greatly reduce the damage of electrodes and materials, and the alarm lamp can also be turned on for alarm. It is suitable for plastic blister packaging of stationery, electronic products, MP3, MP4, MP5, toothbrush, toys, gifts, hardware, batteries, u-disk, etc. It can also be used for PVC plastic welding, PVC processing, etc.

What is explained above is the parameter function of the automatic high frequency machine. I hope it will be helpful to you after reading it. If you want to know more about the automatic high frequency machine, you are welcome to consult customer service online or call our service hotline (at the top right corner of the website). We will provide you with quality service wholeheartedly!

Share:

Contact Us

Write down your information, We will contact you as soon as possible.