Causes and Solutions of High Frequency Machine Ignition

Date:2022-10-19 Reading:

The high-frequency electromagnetic field is used by the high-frequency electromagnetic machine to make the internal molecules of materials collide fiercely with each other, generating high temperature, so as to achieve the purpose of welding and fusion. The ultrasonic machine generates a lot of heat by using the principle of friction heat generation, so as to achieve the purpose of welding and fusion. What are the reasons for the firing of the high frequency machine? How to solve it?

1、 Reasons for high frequency machine firing:

1. The contact between high-frequency die and material is unbalanced, and the pressure is uneven.

2. The current adjustment of the high cycle wave machine is too large.

3. The insulation material of high-frequency die is damaged or aged.

4. The thickness of materials produced is uneven, and the greater the work difference, the greater the probability of ignition.

5. Materials are not suitable for welding of high frequency machinery.

6. The high frequency machine is not installed with a high sensitivity fireproof device.


2、 Processing method after high cycle wave machine:

1. The mold of the high cycle wave machine has four balanced large screws, and the four adjustment molds and cutting will have plate balance.

2. Each time a mold is replaced, it is necessary to adjust the current of the high cycle wave machine to a smaller value, and then slowly adjust it to the appropriate scale for normal use.

3. The materials are not suitable for the production of high cycle wave machines. Some materials that are easy to conduct electricity can be found more suitable for high cycle wave machines.

4. Please install a highly inspired spark protection device on the high frequency machine.

5. Use clean cloth dipped with alcohol or tiana water to clean the place where the upper and lower molds of the high cycle machine are black, scrape the place where the lower molds of the high cycle machine are black with a blade, and then stick the high temperature adhesive tape specially used for the high cycle machine molds. If the upper and lower molds of the high cycle machine have been burned through or burned out, repair welding and replace the insulating materials.

So today's explanation will come to an end. The above is the whole content of today. I believe you have a certain understanding of the causes and solutions of the high frequency machine fire. Thank you very much for your patience. If you want to know more about the high frequency machine, you can call the service hotline at the top right corner to consult us.


Contact Us

Write down your information, We will contact you as soon as possible.