The automatic high frequency machine adopts the high Q value electronic device oscillator tube, and the international industry standard 27.12MHz high-frequency machine frequency stock band, with large and more stable load and super output rate, which can greatly reduce the splicing time of the high-frequency machine and improve the product quality and total output. The automatic high frequency wave machine is equipped with oscillating current adjustment mechanical equipment, and the output power specification is adjusted by the same tuner. The adjustment is simple and convenient. The required high frequency current can be set according to the product specification and the thickness of raw materials. The level of high frequency machine welding can be controlled, and the uniformity of product welding quality can be guaranteed, which is unique.
Performance parameters of automatic high-frequency wave machine:
The key switches of the control circuit of the automatic high frequency wave machine are all 24V working voltage. The imported high-frequency square barrel design scheme is selected, with stronger output and stable current output. The automatic high frequency wave machine is equipped with extremely smart fireproof safety flower equipment, which can avoid flame and damage of abrasive tools during high frequency electric welding. Automatic high frequency machine is equipped with automatic load tripping protection switch to maintain normal and safe operation of equipment. The steam pressure design scheme of the automatic high-frequency wave machine is compact, accurate and can be adjusted independently. The adjustment is precise and convenient. The automatic high cycle machine is also equipped with a steam pressure travel switch, which can adjust the working pressure safety limit and maintain the safety of equipment and abrasives.
The control switch of the automatic high-frequency wave machine is used to control the high-frequency output. Turn off the power switch when correcting the solid model, and turn it on again when working. The automatic high cycle wave machine time delay system is used to adjust the length of time between the upper die and the lower product workpiece of the equipment to a suitable time, so as to ensure the smooth contact between the lower die and the product workpiece, and thus avoid the release of high cycles from the upper die due to not touching the product workpiece, which will endanger the actual effect of electric welding. The electric welding time system of the automatic high frequency machine is adjusted and set according to the electric welding time required by the product workpiece specification. After a period of work, the welding time can be reduced appropriately.
The automatic high-frequency wave machine is equipped with oscillating current adjustment equipment and synchronizer for power adjustment. Easy and convenient adjustment. The required high-frequency current can be set according to the commodity specifications and the thickness of raw materials. Be able to control the level of high-frequency welding machine and ensure the symmetry and beauty of the welding quality of goods. When the automatic high frequency machine is working or stationary, no matter the power is suddenly turned off or the steam body is disconnected, or the power is connected or the natural ventilation is carried out, the equipment is still, and its initial position is maintained, which is not easy to rise or fall suddenly. The actual operating safety factor of the staff is further improved.
What is explained above is the performance parameters of the automatic high frequency machine. I hope it will be helpful to you after reading it. If you want to know more about plastic toys, you are welcome to consult customer service online or call our service hotline. We will provide you with quality service wholeheartedly!
